Our whirlpool front-loading washer keeps flashing f09 followed by e01. i have followed the recommendations in the troubleshooting section of the owners manual, but to no avail. i have cleaned out the drain hose, there are no obstructions and have repeatedly run the drain and spin cycle to completion.. Sud f09 and e01 codes on maytag maxima washer. posted by anonymous on nov 01, 2013. f09/e01 are related codes. long drain: if the drain time exceeds 8 minutes without reaching reset level in pressure sensor, the valves are turned off and the drain pump will stop running. note: suds can cause delays in draining.. My f09 and my e01 codes keep coming on in mid cycle and shutting down the cycle f09/e01 are related codes. long drain: if the drain time exceeds 8 minutes without reaching reset level in pressure sensor, the valves are turned off and the drain pump will stop running..
6 – is the pressure switch hose pinched, clogged, or leaking air? – be sure hose is clean and not bent. 7 – be sure pressure switch is working and replace if part is faulty.. I read my own post and took my own advice on a potentially easier method of cleaning out the drain pump from the front of the washer instead of disassembling all the hoses around the pump. it was a lot easier..
0 comments:
Post a Comment